TeamBWT is a proud distributor of Sunoco
SUNOCO VACUUM PUMP OILS are high quality, high boiling range, low vapor pressure oils specifically designed for use in vacuum pump applications. These fluids are mineral based petroleum fluids. They have excellent oxidation resistance and thermal stability as well as low moisture contents and low volatility to insure excellent performance characteristics in high vacuum pump applications.
SUNOCO VACUUM PUMP OILS are recommended for the lubrication of vacuum pumps and are suitable for applications involving absolute pressures from 50 microns of mercury down to the highest vacuum level achieved by commercially available vacuum pumps. They are also suitable for use in pump rings and sealing glands.
SUNOCO VACUUM PUMP OILS are low in volatility, offer good air release and prevent pump cavitation. In addition to promoting rapid water separation and resistance to emulsion formation, SUNOCO VACUUM PUMP OILS provide very good lubrication and wear resistance at startup and during boundary lubrication regimes. Due to their oxidation and thermal stability, SUNOCO VACUUM PUMP OILS promote long oil service life and a minimum of deposit formation.
| PRODUCT CODES | 9133 |
9373 |
ISO Viscosity Grade |
46 |
68 |
Viscosity, cSt @ 40°C |
45 |
64 |
Viscosity, cSt @ 100°C |
6.9 |
8.25 |
Vicosity Index |
109 |
- - - |
CCS Viscosity -10°C mPa/sec |
- - - |
2550 |
CCS Viscosity -25°C mPa/sec |
1500 |
- - - |
Flash Point, °C | 204 |
222 |
Pour Point, °C | -18 |
-9 |
NOACK, wt% | 10 |
8 |
Vapor Pressure, Torr., @ 100°F | Less than 0.01 |
Less than |
TeamBWT, LLC
Headquarters
1105 17th St. South
Arlington, VA 22202
Office: 703-627-2737
Fax: 703-685-1111
Email: info@teambwt.com
TeamBWT, LLC
Birmingham, Alabama Office
338 Appleford Road
Helena, AL 35080
Glenn Orton
Office: 205-999-3858
Email: info@teambwt.com
